Contact Us

+86 400-6136683

+86 13923650732

+86 752 2089356/5310980

QQ:2880301631

Address:Haibao Industrial Zone, Sandong Digital Park, Huicheng District,Huizhou City,Guangdong Province, China

Protective ventilated products are widely used in various industries: automatic engine and system, LED, electronics, portable electronic products, photovoltaic new energy, outdoor equipment cabinet, chemical packaging, battery and so on. With years efforts, Voir protective technological vents successfully won clients' trust domestic and overseas.

Solution
 
 
Outdoor line lights (typical LED wash wall lamp) LED module and other small LED electronic products are faced with the problem:
1、uneven heating, partially high heating;
2、rain, fog getting into the  enclosure;
3、Low matching IP protection rating 。
Protective vent solution for LED from Voir
1. Allows air to flow in and out to balance the heat and protect lightening components;
2、Water and dust resistance, which prevents liquid and other particle from getting inside the enclosure,lowering strain for seals;
3、Water proof and vapor permeability, which can keep the enclosure dry and avoid condensation, which would compromise the effect of the light,;
4、enhances the quality by maintaining the protection rating and extending service life。

Products

Product Model

Material/Size/Colour

Product Performance

 

VV-P328-00-KS0

 

PC

M06*0.75

black

 

IP:IP67

A/P:≥1.8l/min@△p=7Kpa

WIP:12Kpa

T:-40-125

 

 

VV-POVM05P022-C38G

 

 

PC

M05*0.8

black

 

IP:IP67

A/P:300ml/min@△p=70mbar

WIP:40kpa

T:-40-125

 

 

VV-POVM08P3A-D15 

 

PC

M08*1.0

gray/black

 

IP:IP67

A/P1593.7ml/min@△p=70mbar

WIP:>-12kpa

T:-40-125

 

 

VV-POVM10P3A-D30-1

 

PC

M10*1.0

black

 

IP:IP68

A/P2400ml/min@△p=7Kpa

WIP:>-20kpa

T:-40-125

 

 

VV-POVM12P3A-B30S

 

 

PC

M12*1.5

black

 

IP:IP67

A/P:125ml/min@p=1.25mbar

WIP:>40Kpa

T:-40-125

 

Peculiarity

Voir, LED application special waterproof protective products, basing on the single LED wick assembling installation, and high durabilities such as high temperature, balancing pressure and preventing condensation. Not only with convenient installation construction, practical price and high value, increase LED longevity.
 

Installation

Dimensional Drawing of Threaded Products

Dimensional Drawing of Clip-on Products

Dimensional Drawing of Plug-in Products

Dimensional Drawing of Circular Adhesive Surface-mount Products

 

Straight-through hole and nut installation
Suitable for thin-wall shell

Internal thread installation
Suitable for thick-wall shell

Clip-on installation
Suitable for thin-wall shell

Plug-in installation
Suitable for straight-through hole

Adhesive Surface-mount 1
On inner surface of shell

Adhesive Surface-mount 2
On outer surface of shell with counterbore

 

 

 

Threaded Product

Threaded Product

Clip-on Product

Plug-in Product

Adhesive Product BAE (L/P)

Adhesive Product BAE /P

 

1.Now, VOIR® has rendered services for hundreds of lamps and lanterns manufacturers, typically including PHILIPS, NEO-NEON, Foxconn, etc.
2.VOIR® leading simulation testing system for protective vents enables it to customize products for lamps. 
3.VOIR® will offer customized products according to use condition of lamps
4.Contact us for more information  
Note: Only for industrial use, but not for food, drugs, cosmetics or medical equipment.

Advantage

->LED temperature range is lower 80℃,LED should ventilate in a short during operation process
->Towards outdoor environment, LED must be waterproof,dustproof,temperature resistance(-40~125℃);UV resistance(seasiade)
-LED> installation environment isn't vacuum, while operation process will cause condensation
->99% LED housing material has sealed construction.With rubber sealed gasket, could highly prenvent the aging from the external-internal stress effect.
->Basing on the application, LED has IP65-IP68,high airflow, great pressure balancing ability
->e-PTFE has oleophobic and waterproof construction, its inertness,anti-uv and chemical resistance, increase its longevity